Build your wheelset
Complete wheelset from $1,639.98
: |
Front only
: |
Rear only
: |
Coup - DJ/Slope Carbon Wheelset
Our Coup wheels were designed to be the world's best carbon DJ/Slope rim possible. Hand built with all the stiffness you need in a dirt jump wheel, while maintaining the impact strength needed to keep on taking slams during progression. The Coup has proven to win slope style contests at the highest level and gets props at any jump jam it hits. If you want to spin faster and carry more speed from hit to hit, The Coup is the ticket! Remember, 26 ain't dead!!
Available in 26" Diameter Only
Coups are available as RIMS too!
Coup Specs
Compare the Coup specs against other We Are One Wheelsets.
Coup - DJ,Slope / 26mm$1,639.98 View details | |
---|---|
SERIES | |
Rim Technology |
|
RIDE QUALITY | |
Discipline |
DJ/Slopestyle
|
Ride Feel |
|
Vertical Stiffness Ride feel and stiffness are very subjective but essentially, LOW Vertical Stiffness will be more compliant and HIGH Vertical Stiffness will be less compliant
|
|
Lateral Stiffness Ride feel and stiffness are very subjective but essentially, LOW Lateral Stiffness will be more compliant and HIGH Lateral Stiffness will be less compliant
|
|
RIM SPECS | |
Diameter |
26
|
Weight +/- 4g variation
|
26 = 430g (Single Rim)
|
Internal Width |
|
Rim Depth |
|
Ideal Tire Size |
|
Material |
|
Profile Design |
|
Hole Count - Front |
32
|
Hole Count - Rear |
32
|
ERD ERD (Effective Rim Diameter) is the rim diameter at the point where the spokes sit. Knowing the ERD is essential for choosing spoke length for wheel building or replacing broken spokes.
|
536mm (center drilled)
|
WHEEL BUILD OPTIONS | |
Front Spacing |
Non-Boost 100x15
|
Rear Spacing |
135x10 Bolt On
|
Disk Style |
6 Bolt
|
Freehub Driver XD = SRAM. Microspline = Shimano - Generally found on newer, more expensive cassettes that are 11 or 12 speed. HG = Shimano - Generally on more budget friendly cassettes and are more commonly found on older drivetrains (7 - 10 speed)
|
HG Single Speed
|
DON'T TAKE OUR WORD FOR IT
THESE ARE SOME TOUGH RIMS
"What sets We Are One apart from the crowd is the impressive quality of the rim and the attention to detail that goes into the wheel build itself. The result is a tough and reliable wheelset that should last for season after season of hard use."
~ Mike Kazimer, Pinkbike
QUALITY OVER QUANTITY
Here at We Are One Composites, we take great pride in the craftsmanship that goes into all of our products. All of the laminate staff put their names on each product to show that they are pouring their passion into the product you receive. It is a sign of pride that we demand quality before quantity.
LIFETIME WARRANTY
If you break a rim while riding, we will send you a new one. Period. It is that simple. No rim replacement cost (except for shipping), no hidden fine print and we offer lifetime support.
HAND LAID IN KAMLOOPS BC
Our mission is to connect our customers to where their products come from and how they are made. From design to assembly and all the steps in-between, we have complete control. Owning all of our processes allows us to set tighter tolerances, set and hit our quality standards, and ensure that the product is consistent.
Revolution Carbon Rims
Build Your Own
Rim-only options available. Build your own wheels with any of our Revolution Rims.
Wheel FAQs
For us, tubeless is the way to go! So yes, all of our wheels are shipped tubeless ready with tape and valves already installed. All you need to do is put on a tire and add sealant before hitting the trails!
29” is 2x and 27.5” is 3x. We find with the We Are One rims these lacing patterns tend to give you the best ride quality out of our product!
CX-Rays are a great weight saving tool for your wheelset, saving approximately 100 grams per wheelset (depending on your rim and hub configuration). The spokes also provide the same ride characteristics as our standard Race spokes.
We are doing our best to get you out on the trails enjoying We Are One products as soon as we possibly can. With that being said, all wheels are made to order and lead times will vary depending on what and when you order. Typical lead times are between 2-4 weeks.
Potentially, it depends on where your order is in the queue. If your wheels are already built then unfortunately, we are unable to make any further changes.
Once your order has passed all quality checks and is packaged up, we will send you the courier tracking number.
Depending on where you are located you can expect different shipping times.
- Within Western Canada you can expect anywhere from 2-4 days.
- Within Eastern Canada you can expect anywhere from 5-7 days.
- Within United States you can expect 2-4 days.
- International shipments are anywhere from 5-15 business days.
If you are in Kamloops and able to pick your order up, that works for us! Our office is open Monday - Friday, 9 am - 4 pm. Just send us an email to info@weareone.bike with Sale Order # and we can make sure that we have your order ready for a pick-up.
We would hate to see you cancel an order but, yes you can. That being said since all orders are manufactured to order there is a 15% restocking fee for orders, after a 2 business day grace period.
This is dependent on your location. Within Canada, you are responsible for your provincial taxes. In the United States, you should not experience any additional taxation as it is built into your price. For International orders, you will be responsible for paying any duty and import taxes for your We Are One shipment.
Unfortunately, as all of our products are manufactured to order we do not offer returns on any of our products.
For a full list of frequently asked questions, visit our FAQs page